YSS Stereo Shock Sport

fits BMW

K100RS 4V

K100RS K1100LT

adjustable damping ( 60 clicks )

adjustable spring tension

adjustable in length +10mm

Alu Billet Housing

Black spring

Adjusting tool and sleeves for mounting included

Color of spring black

fits BMW K1 K100RS4V K1100RS K1100LT

For all /5 + /6 + /7 R2V Boxer models
BMW R50/5 R60/5 R75/5 R60/6 R75/6 R90/6 R90S R60/7 R75/7 R80/7 R80RT R80 R100/7 R100S R100RS R100RT R100CS

Incl. ABE

HAGON Suspension shocks "Road", set, /5 - /7

For all /5 - /7 R2V Boxer models up to 9/84
335mm
Timeless, classical design, with latest technology, extremely leakproof rods, 3-way adjustable spring tension, with hook wrench.

Fits BMW R50/5 R60/5 R75/5 R60/6 R75/6 R90/6 R90S R60/7 R75/7 R80/7 R80RT R80 R100/7 R100S R100RS R100RT R100CS

HAGON suspension struts Classic I, set, BMW R45 R65 R65LS to 09/84

Classic look with chrome sleeves
For all BMW R45 R65 R65LS up to 1984

Spring preload can be adjusted three times with a hook wrench!
Due to the different length, these struts are supplied with a strength report.
Maybe one is individual acceptance required.
Max. deflected could grind the rear wheel in the wheel arch on the inner fender and such
Cause a fall. Check for freedom of movement after installation!

Available as:
325mm (Original) - 310mm - 300mm - 290mm
click on the field SHOW VARIANTS
below the item price

HAGON shocks, style ROAD

Spring preload can be adjusted three times with a hook wrench!
Due to the different length, these struts are supplied with a strength report.
Maybe one is individual acceptance required.
Max. deflected could grind the rear wheel in the wheel arch on the inner fender and such
Cause a fall. Check for freedom of movement after installation!

(1978 1979 1980 1981 1982 1983 1984)

Available as:
325mm (Original) - 310mm - 300mm - 290mm
click on the field SHOW VARIANTS
below the item price

Brake caliper paint, racing red, 150ml spray can

(1L=79,97€)

3 way distribution piece for brakelines with 6mm mouting hole

Threads M10x1

(1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996)

sample image

gemäß GPSR: Dieser Artikel kann gesundheitliche Beeinträchtigungen hervorrufen
according to GPSR: This product may cause health problems

Stainless Nut Rearaxle M14x1,5
incl.washer stainless steel polished

R50/5 R60/5 R75/5 R60/6 R75/6 R90/6 R90S R60/7 R75/7 R80/7 R80RT R80 R100/7 R100S R100RS R100RT R100CS R45 R65 R65LS

Raising kit engine
With this, from high quality aluminum CNC machined, Raising kit the engine is increased about 3 cm in the frame.
No welding on the frame required.

Installation instructions for Raising kit
1st The four holes in the axle shafts with a 14.5 mm drill 35-40 mm deep drilling.
2nd Cut with a tap M16 x 1.5 threaded a 26 mm deep into the block.
3rd The four threaded inserts attached M12 / L22 mm screw inward (up to 4 mm below the top of motor housing) and eg with liquid thread lock Loctite 270 secure.
4th Screw the increasing rate with the countersunk screws on the housing and check the width, nominal size = 190 mm. If necessary, interfering welds are beige plastered on the inside of the frame.
5th Now insert the motor into the frame.
6th Depending on the model is one of the four original spacers (to be used by the conversion of not more) left between the frame and engine about 3 mm longer. This distance at the corresponding position offset.
7th Screw in the four 6-M12x1.5 60mm head bolts and tighten to the torque in the manual provided.

8th Installation requires proper tools and knowledge !!!!!

Rear Set Pegs BMW R65/80/100 Monolever 1985-95
Raask Rear Set Pegs
Strong rear set pegs for the sporty rider

fits BMW R65 R80 R80RT R100RT R100RS Monolever 1985-95
Illustration similar

Rear set foot pegs R60/7-R100RS 1978-1980

Strong rear set pegs for the sporty rider

fits BMW R60/7 R75/7 R80/7 R100/7 R100S R100RS R100RT R100 Bj 1978-80
Illustration similar