Equipment parts / Lubricants / Maintenance
Injector cleaner
Injector cleaner
- Cleans dirty gasoline injection systems
- Removes corking and deposits from fuel rail manifolds, flow dividers, injection and intake valves "No start-up problems and no more lean jogging"
- Low idling, good throttle response "Low emissions, environmentally friendly combustion Ensures accurate fuel injection and fuel misting:" Your engine recovers its original performance "
- The fuel consumption is lowered
- Especially suitable for catalytic converter engines
- For optimum engine performance and cleanliness
- Protects the entire fuel system from corrosion
- Use: For the elimination of problems such as starting difficulties, rough idling, poor throttle response, power losses, lean jerking and poor exhaust emissions
- With long-term effect for 2000 km
- When added, the tank should be at least 3/4 full. 300 ml for max. 70 l fuel sufficient.
300ml Can
(1l=€50,00)
Art.No.: 81.22.118
Brake hose holder with rubber grommet, BMW R45 R65 R80ST and universal
Brake hose holder with rubber grommet below
For BMW R45 R65 R65LS R80ST and universal
For comparison 34321237255/34321237259
Art.No.: 34.32.255
Valve Extension, universal, BMW R2V K, R4V, F,
BMW R50/5 R60/5 R75/5 R60/6 R75/6 R90/6 R90S R60/7 R75/7 R80/7 R80RT R80R100/7 R100S R100RS R100RT R100CS R45 R65 R65LS R80G/S R80ST R65GS Paralever models R80GS R100GS R80GS PD R100GS PD R80R R100R R100R Mystik R80GS Basic Monolever models R65 R80 R80RT R100RS R100RT BMW K100 K100/2 K100RS K100RT K100LT K75 K75C K75/2 K75S K75RT K1 K100RS16V K1100LT K1100RS K1200RS K1200GT K1200LT BMW R850R R850GS R850RT R1100GS R1100RS R1100R R1100RT R1100S R1150GS R1150R R1150RS R1150RT R1200C R1200CL..
Art.No.: 71.99.172
Original BMW Bag (set), left and right for BMW Integralcase, used, BMW R2V K2V K4V, F650
Original BMW Bag left and right - made of sturdy textile fabric - replica for BMW Integralcase
Used - very good condition
Inner bags from BMW are no longer available
For BMW Paralever models R80R R100R R100R Mystik
Monolever models R65 R80 R80RT R100RS R100RT
BMW K100 K100/2 K100RS K100RT K100LT K75 K75C K75/2 K75S K75RT K100RS16V K1100LT K1100RS
F650 F650ST
for comparison: 71607666945 71607666946
Stock: 1 set
Art.No.: GB.71.60960
Original BMW Bag (set), left and right for BMW Integralcase, used, BMW R2V K2V K4V, F650
Original BMW Bag left and right - made of sturdy textile fabric - replica for BMW Integralcase
Used - very good condition
Inner bags from BMW are no longer available
For BMW Paralever models R80R R100R R100R Mystik
Monolever models R65 R80 R80RT R100RS R100RT
BMW K100 K100/2 K100RS K100RT K100LT K75 K75C K75/2 K75S K75RT K100RS16V K1100LT K1100RS
F650 F650ST
for comparison: 71607666945 71607666946
Stock: 1 set
Art.No.: G7.16.0960
Toolbag made of nappa leather.
Delivery is done WITHOUT tools
Art.No.: 71.99.802
Battery Charger JMP Skan 8.0
Battery charger and trickle charger 2-8 Amps charging
Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging levels.
Both for fast charging of a battery and for long-term maintenance charging, e.g. when vehicles are wintered.
Suitable for:
• Standard lead acid
• gel
• AGM
• EFB
• Lithium (LiFePO4)
Technical specifications:
• 12 V / 2-8 A Charging
• for batteries from 5 Ah to 160AH
• Low voltage detection: 0.7V
• Overcharge protection, reverse polarity protection
• Splashproof and dustproof (IP65)
• Dimensions: 230x100x65mm
• Weight: 1,0kg
• Power cord: 2 m
• Connection cable: 2.10 m
Scope of delivery:
• JMP Skan 8.0
• Adapter cable with clamps
• Adapter cable with ring eyelets for permanent connection to the battery
• Adapter cable for on-board socket (CAN bus)
Picture similar !
Art.No.: 63.21.076
Battery Charger JMP Skan 4.0
Battery charger and trickle charger
Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging levels.
Both for fast charging of a battery and for long-term maintenance charging, e.g. when vehicles are wintered.
Suitable for:
• Standard lead acid
• gel
• AGM
• EFB
• Lithium (LiFePO4)
Technical specifications:
• 12 V / 1 - 4 A
• for batteries from 4 Ah to 120AH
• Low voltage detection: 0.7V
• Overcharge protection, reverse polarity protection
• Splashproof and dustproof (IP65)
• Dimensions: 190 x 80 x 50 mm
• Weight: 0.75 kg
• Power cord: 2 m
• Connection cable: 2.10 m
Scope of delivery:
• JMP Skan 4.0
• Adapter cable with clamps
• Adapter cable with ring eyelets for permanent connection to the battery
• Adapter cable for on-board socket (CAN bus)
Art.No.: 63.21.075
Universal plug
with the cap removed (bayonet) board sockets.
With screw and solder connection.
Art.No.: 61.99.944
Plug
DIN charging plug with screw connection, for onboard charging
A stable universal DIN plug with removable outer housing (without tools). to unscrew
The cable receptacles are screwed and do not need to be soldered
For socket outlets according to DIN ISO4165 (eg BMW socket)
Schaub connections
Art.No.: 61.99.106
USB-A charger plug 2-fold, bendable
Charging plug with angular double USB M + S
- Input: 12V
- Output: 2 x 2,100 mA for connection in cigarette and standard socket via the 12V mains
- Can be used straight or angled
- Protected against short circuit, reverse polarity and overload
Art.No.: 61.99.054
USB Charger
USB Charger
USB10
This USB charging plug can be used in various on-board sockets 12/24V and converts to the USB standard 5V on 2 USB sockets. USB-A and USB-C with max. 3.6A each.
It fits not only in conventional cigarette sockets, but by removing the red cap (bayonet lock), also in small DIN sockets or vehicle manufacturer sockets (eg BMW).
Due to the angled shape, it can also be used in side-mounted on-board sockets while driving.
- Universal plug for DIN and ZIG sockets
- Practical angular shape
- 3,6A USB-A and USB-C output
- With splash protection cover
Art.No.: 61.99.053
