Injector cleaner

• Cleans dirty gasoline injection systems
• Removes corking and deposits from fuel rail manifolds, flow dividers, injection and intake valves "No start-up problems and no more lean jogging"
• Low idling, good throttle response "Low emissions, environmentally friendly combustion Ensures accurate fuel injection and fuel misting:" Your engine recovers its original performance "
• The fuel consumption is lowered
• Especially suitable for catalytic converter engines
• For optimum engine performance and cleanliness
• Protects the entire fuel system from corrosion
• Use: For the elimination of problems such as starting difficulties, rough idling, poor throttle response, power losses, lean jerking and poor exhaust emissions
• With long-term effect for 2000 km
• When added, the tank should be at least 3/4 full. 300 ml for max. 70 l fuel sufficient.

300ml Can

(1l=€50,00)

Liqui Moly Gasoline Stabilizer

250ml
(1L=49,20€)

Racing Bike-additiv4T

Removes deposits on valves and in combustion chambers. Tested safe oncatalytic converters. 125ml is sufficient for 15 to 20 liters of fuel.
(1L=53,60€)

Bushing, 12mm x 8mm x 13mm, BMW R2V Boxer models and K models

D12 x D8 x H13

Suitable for BMW:

Spacer bushing for oil cooler grille - with oil cooler mounted on cylinder protection bar on the right - see picture

R80GS R100GS R100GS PD R80GS Basic

Spacer bushing for instrument holder on fork bridge - see picture

R60/6 R75/6 R90/6 R90S R60/7 R75/7 R80/7 R80S R80RT R80 R100/7 R100S R100RS R100RT R100CS

Monolever models R65 R65RT R80 R80RT R100RS R100RT

Spacer bushing for air filter housing below - see picture

K75 K75C K75/2 K75S K75RT

K100 K100/2 K100RS K100RT K100LT

K1 K100RS16V

For comparison 31421236883

Injektion valve (Set = 4 pieces), BMW K2V and K4V models

Set of injection nozzles including O-rings at the top and bottom
The significantly better atomizing EV14 nozzles can be installed in the following models without any further changes:

For BMW
K100 K100/2 K100RS K100RT K100LT
K1 K100RS 4V K1100RS - K1100LT
K1200RS K1200LT ( K548)
K1200GT K1200RS (K41)

After installation, synchronization may be required

For comparison 13641460450 13641461523

Splash guard for L-Jetronic

For BMW
K75 K75/2 K75C K75RT K75S
K100 K100/2 K100RS K100RT K100LT

For comparison 51161459119

Hose between throttle housing assy and air cleaner housing
For BMW K75 K75/2 K75C K75RT K75S K100 K100/2 K100RS K100RT K100LT

For comparison 13311461011

Clamps please look 1331012

Gasket between intake manifold and air cleaner housing

For BMW K75 K75/2 K75C K75RT K75S K100 K100/2 K100RS K100RT K100LT K1 K100RS4V

For comparison 13721460754

O-ring for injektion valve
For BMW K100 K100/2 K100RS K100RT K100LT K75 K75C K75/2 K75S K75RT K1 K100RS16V K1100LT K1100RS K1200RS K1200GT K1200LT
For one injektion valve you need two of these o-rings.

For BMW R850R R850GS R850RT R1100GS R1100RS R1100R R1100RT
For one injektion valve you need one of these o-rings. and 1 x gasket ring 1364881

For comparison 13641730767