Telescope forks / Telelever
Wirth fork springset R50/5-R100/7
Wirth fork springset R50/5-R100/7
BMW R50/5 R60/5 R75/5 R60/6 R75/6 R90/6 R90S R60/7 R75/7 R80/7 R80RT R80 R100/7 R100S R100RS R100RT R100CS (Bj.1969-08/84),
R80G/S von 1980-1987
- Polished and optimized for low/no friction, for even better response
- Progressiv Windings
- less brake diving, no more bottoming out, better feedback
- real chassis improvement at an affordable price
- Proven for decades
Fork spring set with ABE and mounting instructions. Please order also forkoil.
Product.Nr.: 31.41.020-B
Set ( 2pc ) Bush under the fork spring, BMW R2V models up to 09/80
Set ( 2pc ) Bush under the fork spring, BMW R2V models up to 09/80
Made from a special, oil-resistant plastic.
This makes it much more durable than the original bushing, which decomposes over the years due to fork oil.
For BMW R50/5 R60/5 R75/5 R60/6 R75/6 R90/6 R90S R60/7 R75/7 R80/7 R100/7 R100S R100RS R100RT up to 09/80
For comparison 31422000384
Product.Nr.: 31.42.425
Clamping pin fork brace , BMW R2V models
Product.Nr.: 07.11.470
Side reflectors (set) front fork, BMW R2V Boxer models
Set of side reflectors, front fork
Boxer sign - Brushed stainless steel including glue
For BMW R60/6 R75/6 R90/6 R90S R60/7 R75/7 R80/7 R80RT R80 R100/7 R100S R100RS R100RT R100CS to 09/80
Product.Nr.: 31.42.804
Threaded ring for damper, BMW R2V models up to 09/80
Threaded ring for damper
For BMW R50/5 R60/5 R75/5 R60/6 R75/6 R90/6 R90S R60/7 R75/7 R80/7 R100/7 R100S R100RS R100RT up to 09/80
For comparison 31421232046
Product.Nr.: 31.42.046
Aluring under the fork spring, BMW R2V models up to 09/80
Alruring under (bush) the fork spring
Please compare dimensions:
Outside diameter: 26,1mm
Internal diameter: 15.65mm
Height: 5.5mm
If the removed part has different dimensions, you will also need thread No. 3142046
For BMW R50/5 R60/5 R75/5 R60/6 R75/6 R90/6 R90S R60/7 R75/7 R80/7 R100/7 R100S R100RS R100RT up to 09/80
For comparison 31421232045
Product.Nr.: 31.42.045
Side reflectors (set), front fork, BMW R2V Boxer Modelle
Set of side reflectors, front fork
For BMW R60/6 R75/6 R90/6 R90S R60/7 R75/7 R80/7 R80RT R80 R100/7 R100S R100RS R100RT R100CS to 09/80
See Boxer Signs 3142803
Product.Nr.: 31.42.802
Set Pistonrings (3 pc) Fork Dampersystem /5-100RS up to 09/1981
Set for one damper
fits BMW R50/5 R60/5 R75/5 R60/6 R75/6 R90/6 R90S R60/7 R75/7 R80/7 R80 R100/7 R100S R100RS R100RT up to 09/1980
for comp: 31421232059
Product.Nr.: 31.99.001
Repair Kit Fork Dampersystem /6-100RS up to 09/1980
complete kit to overhaul the dampersystem in both forklegs / telescopic fork
included are
2x Fork oil seal
2x small spring in system ( these are not the big fork springs)
2x Ring, fork slider below
all washers and gasketrings
fits BMW R60/6 R75/6 R90/6 R90S R60/7 R75/7 R80/7 R80RT R80 R100/7 R100S R100RS R100RT up to 09/1980
Product.Nr.: 31.99.000
Fork Rubber boot 11 folds
Fork Rubber boot with 11 ribs - length 195mm
Telescopic gaiter with 11 folds
originally mountet on /6+/7
also fits all BMW R50/5 R60/5 R75/5 R60/6 R75/6 R90/6 R90S R60/7 R75/7 R80/7 R80RT R80 R100/7 R100S R100RS R100RT R100CS R45 R65 R65LS R80G/S R80ST R65GS R65 R80 R80RT R100RT R100RS Monolever
When used on RT+RS Models steering stop may be reduced
for comparison BMW 31421234908
The tie straps have to be ordered separately partno. 0712121
(1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996)
Product.Nr.: 31.42.908
Fork Rubber boot 13 folds
Fork Rubber boot
Telescopic gaiter with 13 folds
was used in /5 models
Original for 50/5 60/5 75/5
also fits BMW up to 09/1984
R60/6 R75/6 R90/6 R90S R60/7 R75/7 R80/7 R80RT R80 R100/7 R100S R100RS R100RT R100CS
also fits R65GS R80G/S R80ST
for comparison 31422002115
The two tie straps have to be ordered separately Nr. 0712121
(1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984)
Product.Nr.: 31.42.115
Lampholder Set, Alu polished 38,5mm, BMW R2V Monolever models
Holder is blasted and then polished by hand to a high gloss.
Dimensions:
Length measured from the middle of the standpipe to hole center
Headlight mounting approx. 120 mm.
Diameter hole for Headlight mounting: 10 mm
Total height about 80 mm
Suitable for standpipe 38,5mm
(1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996)
Product.Nr.: 31.99.479
Lampholder Set, Alu polished 36mm, BMW R2V models
Holder is blasted and then polished by hand to a high gloss.
Dimensions:
Length measured from the middle of the standpipe to hole center
Headlight mounting approx. 120 mm.
Diameter hole for Headlight mounting: 10 mm
Total height about 80 mm
Suitable for standpipe 36mm
(1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987)
Product.Nr.: 31.99.878
Lampholder Alu Chrome 38-41 mm black
CNC Alu Lampholder Set for 38-41 mm
Length Holder 87mm
total length from stanchion 105mm
Adjustable in width to fit different diameters of Headlight
Product.Nr.: 31.22.0604
Lampholder Alu Chrome 38-41 mm
CNC Alu Lampholder Set for 38-41 mm
Length Holder 87mm
total length from stanchion 105mm
Adjustable in width to fit different diameters of Headlight
Product.Nr.: 31.22.0605
Lampholder Alu polished 35-38mm
fits 35-38mm
polished Alu holders +chrome stanchion mounts
115mm long
Product.Nr.: 31.22.0991
Lampholder Alu black 35-37
CNC Alu Lampholder Set for 35-37 mm
Length Holder 87mm
total length from stanchion 105mm
Adjustable in width to fit different diameters of Headlight
Product.Nr.: 31.22.0602
