Equipment parts / Lubricants / Maintenance
Carburetor exterior cleaner Liqui Moly
Special solvent mixture for the quick and thorough removal of greasy dirt and deposits.
Cleaning without dismantling
simple application
good cleaning effect
allows cleaning without dismantling
economically
quick cleaning
400ml
( Liter 29,75.-€ )
Product.Nr.: LM.33.25
Carburetor cleaner, 1 liter can, BMW R2V models
Carburetor cleaner dissolves deposits and contamination and is an indispensable aid
Product informationStorage: Keep only in the original container in a cool, well-ventilated place.
Application:Dosage: Dilute the carburetor cleaner in a ratio of 1: 4 for variant A) and 1: 1 for variant B) with petrol.
Variant A) Fill the carburetor chamber with the cleaning agent mixture via the ventilation or petrol filler hose and let it take effect for approx. Do not start the engine during this time! To empty, either drain the float chamber or start the engine and burn the contents of the chamber. Attention, if burned by the engine, residues from the chamber will be burned! Possibly. Observe “stuttering” of the motor.
Variant B) Place contaminated parts in the mixture for 2 to 4 hours (overnight if heavily soiled) and then wash them out with petrol. Remove all rubber seals or parts beforehand. Use a suitable container! Safety: Wear gloves and protective goggles when working, ensure good ventilation, do not eat, drink, smoke or sniff!(1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996)
Product.Nr.: 81.22.120
Brake cylinder paste, 180gram tube, BMW and universal
Brake cylinder paste
The ATE brake cylinder paste ensured in the repair and installation of hydraulic brake components and clutch parts the necessary lubrication and preservation. It is applied thinly and evenly on the cylinder surfaces, the piston and the sealing elements.
- The ATE brake cylinder paste is compatible with brake fluids DOT 3, DOT 4 and DOT 5.1.
- Simple assembly hydraulic brake parts
- Protection of the treads from corrosion
Product.Nr.: 81.22.113
Sticker and adhesive remover
Sticker and adhesive remover
-Removes glue residue, stickers, tree resin, wax, paint mist
-Removal of adhesive tape residues and paints
-Cleans painted parts, glass and plastic surfaces
-Before applying the surfaces to be cleaned must be tested for compatibility
400ml Spray
(1l=€22,50)
Product.Nr.: 81.22.119
Injector cleaner
Injector cleaner
- Cleans dirty gasoline injection systems
- Removes corking and deposits from fuel rail manifolds, flow dividers, injection and intake valves "No start-up problems and no more lean jogging"
- Low idling, good throttle response "Low emissions, environmentally friendly combustion Ensures accurate fuel injection and fuel misting:" Your engine recovers its original performance "
- The fuel consumption is lowered
- Especially suitable for catalytic converter engines
- For optimum engine performance and cleanliness
- Protects the entire fuel system from corrosion
- Use: For the elimination of problems such as starting difficulties, rough idling, poor throttle response, power losses, lean jerking and poor exhaust emissions
- With long-term effect for 2000 km
- When added, the tank should be at least 3/4 full. 300 ml for max. 70 l fuel sufficient.
300ml Can
(1l=€50,00)
Product.Nr.: 81.22.118
Brake hose holder with rubber grommet, BMW R45 R65 R80ST and universal
Brake hose holder with rubber grommet below
For BMW R45 R65 R65LS R80ST and universal
For comparison 34321237255/34321237259
Product.Nr.: 34.32.255
Valve Extension, universal, BMW R2V K, R4V, F,
BMW R50/5 R60/5 R75/5 R60/6 R75/6 R90/6 R90S R60/7 R75/7 R80/7 R80RT R80R100/7 R100S R100RS R100RT R100CS R45 R65 R65LS R80G/S R80ST R65GS Paralever models R80GS R100GS R80GS PD R100GS PD R80R R100R R100R Mystik R80GS Basic Monolever models R65 R80 R80RT R100RS R100RT BMW K100 K100/2 K100RS K100RT K100LT K75 K75C K75/2 K75S K75RT K1 K100RS16V K1100LT K1100RS K1200RS K1200GT K1200LT BMW R850R R850GS R850RT R1100GS R1100RS R1100R R1100RT R1100S R1150GS R1150R R1150RS R1150RT R1200C R1200CL..
Product.Nr.: 71.99.172
Toolbag made of nappa leather.
Delivery is done WITHOUT tools
Product.Nr.: 71.99.802
Battery Charger JMP Skan 8.0
Battery charger and trickle charger 2-8 Amps charging
Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging levels.
Both for fast charging of a battery and for long-term maintenance charging, e.g. when vehicles are wintered.
Suitable for:
• Standard lead acid
• gel
• AGM
• EFB
• Lithium (LiFePO4)
Technical specifications:
• 12 V / 2-8 A Charging
• for batteries from 5 Ah to 160AH
• Low voltage detection: 0.7V
• Overcharge protection, reverse polarity protection
• Splashproof and dustproof (IP65)
• Dimensions: 230x100x65mm
• Weight: 1,0kg
• Power cord: 2 m
• Connection cable: 2.10 m
Scope of delivery:
• JMP Skan 8.0
• Adapter cable with clamps
• Adapter cable with ring eyelets for permanent connection to the battery
• Adapter cable for on-board socket (CAN bus)
Picture similar !
Product.Nr.: 63.21.076
Battery Charger JMP Skan 4.0
Battery charger and trickle charger
Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging levels.
Both for fast charging of a battery and for long-term maintenance charging, e.g. when vehicles are wintered.
Suitable for:
• Standard lead acid
• gel
• AGM
• EFB
• Lithium (LiFePO4)
Technical specifications:
• 12 V / 1 - 4 A
• for batteries from 4 Ah to 120AH
• Low voltage detection: 0.7V
• Overcharge protection, reverse polarity protection
• Splashproof and dustproof (IP65)
• Dimensions: 190 x 80 x 50 mm
• Weight: 0.75 kg
• Power cord: 2 m
• Connection cable: 2.10 m
Scope of delivery:
• JMP Skan 4.0
• Adapter cable with clamps
• Adapter cable with ring eyelets for permanent connection to the battery
• Adapter cable for on-board socket (CAN bus)
Product.Nr.: 63.21.075
Universal plug
with the cap removed (bayonet) board sockets.
With screw and solder connection.
Product.Nr.: 61.99.944
Plug
DIN charging plug with screw connection, for onboard charging
A stable universal DIN plug with removable outer housing (without tools). to unscrew
The cable receptacles are screwed and do not need to be soldered
For socket outlets according to DIN ISO4165 (eg BMW socket)
Schaub connections
Product.Nr.: 61.99.106
USB-A charger plug 2-fold, bendable
Charging plug with angular double USB M + S
- Input: 12V
- Output: 2 x 2,100 mA for connection in cigarette and standard socket via the 12V mains
- Can be used straight or angled
- Protected against short circuit, reverse polarity and overload
Product.Nr.: 61.99.054
