Charging plug with angular double USB M + S

- Input: 12V
- Output: 2 x 2,100 mA for connection in cigarette and standard socket via the 12V mains
- Can be used straight or angled
- Protected against short circuit, reverse polarity and overload

This USB charging plug can be used in various on-board sockets 12/24V and converts to the USB standard 5V on 2 USB sockets. USB-A and USB-C with max. 3.6A each.
It fits not only in conventional cigarette sockets, but by removing the red cap (bayonet lock), also in small DIN sockets or vehicle manufacturer sockets (eg BMW).
Due to the angled shape, it can also be used in side-mounted on-board sockets while driving.

- Universal plug for DIN and ZIG sockets
- Practical angular shape
- 3,6A USB-A and USB-C output
- With splash protection cover

Starter Cable
with Electronic protection unit
1,6m

Voltmeter incl. Mounting bracket and assembly instructions

This article is not available at the moment

Measuring range: 8 - 16 Volt
Power supply: 12 volts
Mounting diameter: 52mm

Liqui Moly silicone grease

The Liqui Moly Silicone Grease 100 g is a lubricant with a wide range of applications at all temperatures. With excellent release and sliding properties, e.g. B. in metal / plastic pairings, high oxidation resistance and low evaporation tendency. Resistant to cold and hot water, aging and temperature-stable, seals off dirt and can be pumped in central lubrication systems. Can be used in weakly acidic or weakly basic areas. Also suitable for lubricating roller and plain bearings with low bearing pressures. Marking according to DIN 51502 KSI2 S-40. Operating temperature range: -40°C to +200°C. Protects battery poles and electrical contacts from corrosion and oxidation. For safe starting, bright lighting and longer battery life. Prevents acid damage. Good compatibility with plastics. Prevents leakage currents and reduces contact resistance.

100g tube

(1kg=€126.- net)

Battery pole grease, universal

50gr. tube

(1kg=€82,35)

Board socket with hinged lid, BMW R2V, K2V models and universal

incl. adapter cable approx. 39cm long
01 is plus / 02 is ground

For BMW

R45 R65 R65LS

R50/5 R60/5 R75/5 R60/6 R75/6 R90/6 R90S R60/7 R75/7 R80/7 R80RT R80 R100/7 R100S R100RS R100RT R100CS

R65GS R80G/S R80ST

Monolever modelsR65 R80 R80RT R100RS R100RT to 01/91

Paralever Modelle R80GS R100GS R100GS PD to 91

BMW K75 K75C K75/2 K75S K75RT K100 K100/2 K100RS K100RT K100LT

Connection via standard flat connectors / cable lugs

Stainless steelUnder Engine Batteriebox with LiT-Ion Batterie

Set incl. Lithium-ion batterie, 1,3m batterie cables with seperate ring connectors

( so that cabels can be fit to individual length )

Weight incl Batterie only 3Kg

Box size 168mm x 96mm x 132mm

mainstand must be modified or removed

Fits all BMW 2V

With R80R / R100R and R80GS / R100GS only using a Y-pipe. Assembly with org. Front silencer/ collectorbox not possible.

With the R65 R80 R100 Monolever only using an H-pipe as a front silencer. Assembly with org. Front silencer/ collectorbox not possible.

Under Engine Batteriebox

Stainless steel

168mm x 96mm x 132mm

mainstand must be modified or removed

Fits all BMW 2V

With R80R / R100R and R80GS / R100GS only using a Y-pipe. Assembly with org. Front silencer/ collectorbox not possible.

With the R65 R80 R100 Monolever only using an H-pipe as a front silencer. Assembly with org. Front silencer/ collectorbox not possible.

without batterie

Mounting / Fastening kit for 25AH / 30AH battery

For BMW R65 R80 R80RT R100RT R100RS Monolever

For comparison 61211452240/61211452342

Fuse holder for flat fuse

universal adaptive

Fuse Holder

with screw connections, plastic bayonet closure
for ceramic fuse