- Maintenance / Cleaning products
- Oil and lubrication
- Tools / Special tools
- Parts for service and inspection
K&N, Airfilter cleaner/oil set
K&N, Airfilter cleaner/oil set
For all K&N air filter
Product.Nr.: 13.72.005
STABURAGS NBU 30 PTM Lubricating and assembly grease
Recommended from BMW for clutch and drive shaft, spline on rear axle
Good corrosion protection, counteracts tribocorrosion.
For comparison 07559056992
50g tube
(1KG=€698,00)
Product.Nr.: 07.55.992
Carburetor exterior cleaner Liqui Moly
Special solvent mixture for the quick and thorough removal of greasy dirt and deposits.
Cleaning without dismantling
simple application
good cleaning effect
allows cleaning without dismantling
economically
quick cleaning
400ml
( Liter 29,75.-€ )
Product.Nr.: LM.33.25
Carburetor cleaner, 1 liter can, BMW R2V models
Carburetor cleaner dissolves deposits and contamination and is an indispensable aid
Product informationStorage: Keep only in the original container in a cool, well-ventilated place.
Application:Dosage: Dilute the carburetor cleaner in a ratio of 1: 4 for variant A) and 1: 1 for variant B) with petrol.
Variant A) Fill the carburetor chamber with the cleaning agent mixture via the ventilation or petrol filler hose and let it take effect for approx. Do not start the engine during this time! To empty, either drain the float chamber or start the engine and burn the contents of the chamber. Attention, if burned by the engine, residues from the chamber will be burned! Possibly. Observe “stuttering” of the motor.
Variant B) Place contaminated parts in the mixture for 2 to 4 hours (overnight if heavily soiled) and then wash them out with petrol. Remove all rubber seals or parts beforehand. Use a suitable container! Safety: Wear gloves and protective goggles when working, ensure good ventilation, do not eat, drink, smoke or sniff!(1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996)
Product.Nr.: 81.22.120
Sticker and adhesive remover
Sticker and adhesive remover
-Removes glue residue, stickers, tree resin, wax, paint mist
-Removal of adhesive tape residues and paints
-Cleans painted parts, glass and plastic surfaces
-Before applying the surfaces to be cleaned must be tested for compatibility
400ml Spray
(1l=€22,50)
Product.Nr.: 81.22.119
Injector cleaner
Injector cleaner
- Cleans dirty gasoline injection systems
- Removes corking and deposits from fuel rail manifolds, flow dividers, injection and intake valves "No start-up problems and no more lean jogging"
- Low idling, good throttle response "Low emissions, environmentally friendly combustion Ensures accurate fuel injection and fuel misting:" Your engine recovers its original performance "
- The fuel consumption is lowered
- Especially suitable for catalytic converter engines
- For optimum engine performance and cleanliness
- Protects the entire fuel system from corrosion
- Use: For the elimination of problems such as starting difficulties, rough idling, poor throttle response, power losses, lean jerking and poor exhaust emissions
- With long-term effect for 2000 km
- When added, the tank should be at least 3/4 full. 300 ml for max. 70 l fuel sufficient.
300ml Can
(1l=€50,00)
Product.Nr.: 81.22.118
Contact Treatment Grease
Contact grease for weatherproof cable trees, plug + switch
High quality, non-melting grease for outdoor connectors, steering switches and ECUs. The most sensible possibility of moisture
And to suppress condensation and to prevent oxidation. PH neutral and compatible with common plastics as well as metals.
20 gram Tube
(100g = € 795,00)
Product.Nr.: 81.22.202
AUTOSOL - stainless steel polish
AUTOSOL - stainless steel polish
75ml tube
(1L=120,00€)
Product.Nr.: 81.23.121
Autosol - anti blue
Autosol - anti blue
The clever combination of chemical effectiveness and mechanical polishing power effectively removes even stubborn blue and brown discolourations on stainless steel exhaust systems.
The exhaust gets back its silvery shine.
The product can be applied sparingly and selectively without the need for tedious masking.
Corrosion inhibitors reduce the material stress to a minimum.
125ml bottle
(Literpreis: 153,28 € inkl. 19% MwSt.)
Product.Nr.: 81.23.150
Multi-Purpose Spray LM40
Liqui Moly LM-40
Lubricates, cleans, protects and preserves the motorcycle
200ml
(1L=35,50€)
Product.Nr.: LM.33.90
Oil drip tray, 6Liter, BMW and Universal
- Tray / Drip tray HDPE: Resistant to solvents, acids, alkalis, water, alcohols, oil, gasoline
- Easy to carry with handles
- Capacity 6 liters
- Dimension (WxDxH): 467x370x120 mm
Product.Nr.: 83.30.781
Rath's skin protection fluid pr88 liquid
Rub Before working with pr88. After work, the dirt is rinsed with a little water along with pr88.
Container type: Spray bottle
Contains: 150 ml
( 1 Liter € 67,66)
Product.Nr.: 73.00.285
