Stahlbus Oil Drain Valve M18x1.5
M18 x 1.5 Set
A conventional oil change is always associated with spills and dirty hands. Therefore, this system has been developed with which you can perform an oil change completely safe and clean.

The stahlbus®-oil drain valve will easily replace the existing drain screw. When changing the oil, you unscrew the cap and put on the hose connector via quick release. Only when this is locked, the valve opens and the oil can be drained into the provided container.

The advantages at a glance:
• Easy handling due to quick release
• Drain valve can not be lost
• No risk of burns from hot oil
• Sump thread is spared
• Double outlet protection (protective cap and valve)
• Protective cover against loss through O-ring
• Change oil without tools

fits BMW R50/5 R60/5 R75/5 R60/6 R75/6 R90/6 R90S R60/7 R75/7 R80/7 R80RT R80 R100/7 R100S R100RS R100RT R100CS R45 R65 R65LS R80G/S R80ST R65GS R65 R80 R80RT R100RT R100RS Monolever R80GS R100GS R80GS PD R100GS PD R80R R80R Mystik R100R R100RMystik R80GS Basic Paralever

K75 K75/2 K75C K75RT K75S K100 K100/2 K100RS K100RT K100LT K1 K100RS4V K1100RS K1100LT K1200RS K1200LT K1200GT

Sealing compound silicone gray 70ml


70ml tube

For all surfaces in the engine, transmission and drive area

Price per liter € 112,86

Sealing compound Loctite

Recommended by BMW

50ml cartridge For all surfaces in the engine, transmission and drive area clear-eyed


Price per Kg € 418,00

Sealing compound DREI BOND 1209

Transparent sealant, , works from -55° - +200°
Recommended by BMW for engine, transmission, gearbox...

For comparison 07589062376
Price perKg € 531,66.-

Cooper Paste acts a separator and a lubricant, as well as a corrosionprotection agent for brakes, spark plugs, heat exchangers , exhaust etc.
Operating temperature range: -30Grad to +1100Grad
0.100 Gramm

(1kg=€ 108,00)

K&N, Airfilter cleaner/oil set

For all K&N air filter

Brake cylinder paste

The ATE brake cylinder paste ensured in the repair and installation of hydraulic brake components and clutch parts the necessary lubrication and preservation. It is applied thinly and evenly on the cylinder surfaces, the piston and the sealing elements.

- The ATE brake cylinder paste is compatible with brake fluids DOT 3, DOT 4 and DOT 5.1.

- Simple assembly hydraulic brake parts

- Protection of the treads from corrosion

Injector cleaner

• Cleans dirty gasoline injection systems
• Removes corking and deposits from fuel rail manifolds, flow dividers, injection and intake valves "No start-up problems and no more lean jogging"
• Low idling, good throttle response "Low emissions, environmentally friendly combustion Ensures accurate fuel injection and fuel misting:" Your engine recovers its original performance "
• The fuel consumption is lowered
• Especially suitable for catalytic converter engines
• For optimum engine performance and cleanliness
• Protects the entire fuel system from corrosion
• Use: For the elimination of problems such as starting difficulties, rough idling, poor throttle response, power losses, lean jerking and poor exhaust emissions
• With long-term effect for 2000 km
• When added, the tank should be at least 3/4 full. 300 ml for max. 70 l fuel sufficient.

300ml Can

(1l=€50,00)

Brake fluid DOT4
bottle with 0,5 liters

liter= € 19,80

Brake fluid DOT4
bottle with 0,25 liters

(1l=€23,20)

Contact grease for weatherproof cable trees, plug + switch

High quality, non-melting grease for outdoor connectors, steering switches and ECUs. The most sensible possibility of moisture
And to suppress condensation and to prevent oxidation. PH neutral and compatible with common plastics as well as metals.

20 gram Tube

(100g = € 795,00)