R nine T
- R 18
- /5 - /6 - /7 R90S R100S R100RS R100RT R100CS (38mm manifold)
- R100/7 R100S R100RS R100RT (40mm manifold)
- R45, R65, R65LS '78 - '844
- R 65/80/80RT/100RS, RT Monolever models from '85
- R80G/S / R80ST
- R80R - R100GS Mystik - Paralever
- R850R - R1100GS
- R1100S
- R1150GS
- R1150R / Rockster
- R1200S
- R1200GS/GSA 2004 - 2009
- R1200GS/GSA 2010 - 2013
- R1200GS/GSA LC 2013-2019 Euro 3 - Euro 4
- R1250GS LC 2019 - 2021
- R nine T
GUNBALL 25, double silencer with 25mm outlet cone, BMW nineT (Euro 3)
- Rear silencer with EG-ABE/ EU type approval
- Dull and rich sound and still a bit quieter
- Completely made of stainless steel
- Mufflers and hangers hand-welded (TIG)
- Noise reduction insert in the silencer outlet
- incl. mounting material
The silencer is mounted at the original screw point.
Note for R nineT Scrambler:
Mounting on the R nineT Scrambler, only possible with a different exhaust bracket. WITHOUT a rear frame, the silencer is attached using HATTECH exhaust brackets.
Fits to:
BMW NineT - ALL MODELS
Available as:
polished - brushed - brushed & tarnish on the visual welds
click on the field SHOW VARIANTS
Product.Nr.: 18.97.221
GUNBALL 60, double silencer with 60mm outlet cone, BMW nineT (Euro 3)
- Rear silencer with EG-ABE/ EU type approval
- Dull and rich sound and still a bit quieter
- Completely made of stainless steel
- Mufflers and hangers hand-welded (TIG)
- Noise reduction insert in the silencer outlet
- incl. mounting material
The silencer is installed at the original screw connection point.
Note for R nineT Scrambler:
Mounting on the R nineT Scrambler, only possible with a different exhaust bracket. WITHOUT a rear frame, the silencer is attached using HATTECH exhaust brackets.
Fits to:
BMW NineT - ALL MODELS
Available as:
polished - brushed - brushed & tarnish on the visual welds
click on the field SHOW VARIANTS
Product.Nr.: 18.97.222
Classic /5 - Silencer, BMW nineT (Euro 3)
- Rear silencer with EG-ABE/ EU type approval
- Dull and rich sound and still a bit quieter
- Completely made of stainless steel
- Mufflers and hangers hand-welded (TIG)
- Noise reduction insert in the silencer outlet
- incl. mounting material
The silencer is installed at the original screw connection point.
Note for R nineT Scrambler:
Mounting on the R nineT Scrambler, only possible with a different exhaust bracket. WITHOUT a rear frame, the silencer is attached using HATTECH exhaust brackets.
Fits to:
BMW NineT - ALL MODELS
Available as:
polished - brushed - brushed & tarnish on the visual welds
click on the field SHOW VARIANTS
Product.Nr.: 18.97.223
OYK HIGH - rear silencer, BMW nineT (Euro 3)
- Rear silencer with EG-ABE/ EU type approval
- Dull and rich sound and still a bit quieter
- Completely made of stainless steel
- Mufflers and hangers hand-welded (TIG)
- Noise reduction insert in the silencer outlet
- incl. mounting material
To assemble the raised silencer:
Installation is only possible if the original rear frame is removed.
Note for R nineT Scrambler:
The assembly on the R nineT Scrambler takes place directly on the original exhaust hanger.
Fits to:
BMW NineT - ALL MODELS
Available as:
polished - brushed - brushed & tarnish on the visual welds
click on the field SHOW VARIANTS
Product.Nr.: 18.97.225
PureCraft - rear silencer, BMW nineT (Euro 3, 4)
- Rear silencer with EG-ABE
- Completely made of stainless steel
- Weight: 2620 grams
- Weight saving compared to series: 1700 grams
- Power: 108 hp at 7600 rpm
- Torque: 114 Nm at 4800 rpm
Welded damper and connecting tube. Welded suspension. 100% fit and tightness.
Enormous surprise on the test bench: pushes 114 Nm already at 4800 rpm, significantly earlier than the series
(Original silencer 110 Nm at 6200 rpm, Akrapovic 105 Nm at 6400 rpm), without losses in the further speed range.
Also brings more power at the top 108 hp at 7600 rpm. (Original silencer 105 hp at 7800 rpm, Akrapovic 107 hp at 7600 rpm).
An insider tip for BMW.
dB killer in the silencer outlet.
Fits to:
BMW NineT
Available as:
polished - brushed - brushed & tarnish on the visual welds
click on the field SHOW VARIANTS
Product.Nr.: 18.97.226
PureCraft HIGH - rear silencer, BMW nineT (Euro 3)
- Rear silencer with EG-ABE/ EU type approval
- Dull and rich sound
- Completely made of stainless steel
- Mufflers and hangers hand-welded (TIG)
- Noise reduction insert in the silencer outlet
- incl. mounting material
To assemble the raised silencer:
Installation is only possible if the original rear frame is removed.
The silencer is mounted using HATTECH exhaust brackets.
Note for R nineT Scrambler:
The assembly on the R nineT Scrambler takes place directly on the original exhaust hanger.
Fits to:
BMW NineT
Available as:
polished - brushed - brushed & tarnish on the visual welds
click on the field SHOW VARIANTS
Product.Nr.: 18.97.227